mp3500

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • cmpelser
    Trusted Tech
    • Jan 2008
    • 173

    #1

    mp3500

    i have just changed the drum dev (b079-9640) and blade etc. why is it that when i do developer initialization it starts asking for toner? anyway, got it going again, looked good for a while- then, it suddenly got a very ugly background. (original toner). help.
  • TonerMunkeh
    Professional Moron

    2,500+ Posts
    • Apr 2008
    • 3865

    #2
    Originally posted by cmpelser
    i have just changed the drum dev (b079-9640) and blade etc. why is it that when i do developer initialization it starts asking for toner? anyway, got it going again, looked good for a while- then, it suddenly got a very ugly background. (original toner). help.
    Sorry to be the bearer of bad news sir, you've put the wrong developer in it.

    Correct part number is B296 9640. Also make sure you are using type MP4500 toner.

    The Alex-C1 (MP4000/5000) takes the same developer and toner mix too.
    Last edited by TonerMunkeh; 09-01-2008, 06:35 PM.
    It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

    Hit it.

    Comment

    • cobiray
      Passing Duplication Xpert

      1,000+ Posts
      • Mar 2008
      • 1199

      #3
      There has been much discussion on the forum about this model and it's poor image quality issues. There is a bulletin for both models which use the B296 9640 developer. Here is a link which has the bulletin posed http://www.copytechnet.com/forums/ri...er-mp4000.html. If you did put in the B079 developer, it is the cause of your PCQ.
      the savin2535 is displaying well bet the hiter lamp is not shining and the lamp had been tested o.k.please kindly help.
      Samir: No, not again. I... why does it say paper jam when there is no paper jam? I swear to God, one of these days, I just kick this piece of shit out the window.
      Michael Bolton: You and me both, man. That thing is lucky I'm not armed.

      Comment

      Working...