JITTERING MPW C2200

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sharpmind
    Trusted Tech

    250+ Posts
    • Sep 2009
    • 478
    #1

    [CQ] JITTERING MPW C2200

    Has anybody encountered this kind of problem in MPC W2200SP? There is a jittering in the image while printing. The interval of the jitter is almost 2.5 inches. Auto print head adjust and flushing were already done yet still same problem. Please see attached photo for your review. Any ideas?


    12463878_1170015743026691_1615371654_n.jpg12498900_1170015749693357_44312298_n.jpg
    Last edited by sharpmind; 01-04-2016, 07:03 PM.
    Tags: None
    • allan
      RTFM!!

      5,000+ Posts
      • Apr 2010
      • 5463
      #2
      Re: JITTERING MPW C2200

      Are the cuts in the lines like flush square?
      Offset by dots or mechanical?
      Can you hear a jitter in the engine?
      Whatever

        Comment

        • jeff33
          Technician

          50+ Posts
          • Aug 2009
          • 61
          #3
          Re: JITTERING MPW C2200

          check the TSBs ricoh had a run of bad barrings for the carriage and paper feed they were giving replacement parts free.

            Comment

            Previous template Next
            Working...