Mp 2852 upper fuser roller

[COPIERMAN]

Does anyone know if the Mp 2851 upper fuser roller is same for the MP 2852 the parts book shows a different Part # but fuser assy looks the same to me. They are using same lower pressure roller

[sandmanmac]

Re: Mp 2852 upper fuser roller

Does anyone know if the Mp 2851 upper fuser roller is same for the MP 2852 the parts book shows a different Part # but fuser assy looks the same to me. They are using same lower pressure roller

I asked the exact same question a couple of months ago, and was told that it was.

http://www.copytechnet.com/forums/ricoh-savin-gestetner-lanier/105119-mp2851-hot-roller-vs-mp2852.html?highlight=#post499984

[apump]

Re: Mp 2852 upper fuser roller

yes there different. 2852 is ae011128. the 2851 fuser roller will fit in there and work sort of. eventually you will start getting jamming and folding corners. I believe its the diameter.

[sharpmind]

Re: Mp 2852 upper fuser roller

Does anyone know if the Mp 2851 upper fuser roller is same for the MP 2852 the parts book shows a different Part # but fuser assy looks the same to me. They are using same lower pressure roller

If I were you, I would try to do the testing and see the results whether it works or not.