[Jamming] Ricoh 2035

[tcypy1961]

what does the pf deck have to do with Jam 060 code??? this happens with legal paper in either pf drawer; however letter LEF works with no paper stoppage; which is what's happening paper is not getting hung on anything just stopping; can only get the copier to stop on multiple run not on single copy run.
Thanks!!!

[Polarbear]

Re: Ricoh 2035

what does the pf deck have to do with Jam 060 code??? this happens with legal paper in either pf drawer; however letter LEF works with no paper stoppage; which is what's happening paper is not getting hung on anything just stopping; can only get the copier to stop on multiple run not on single copy run.
Thanks!!!

Hi tcypy

If I understand your question correctly: single copies don't cause the jam but multiple copies do?

Is the machine set to auto-detect paper size per tray or is it set to a specific type?

It sounds like it has to do with paper timing - which makes me think it has to do with paper size detection.

[slimslob]

Re: Ricoh 2035

Jam 060 is a trail edge jam at vertical transport sensor 3. Check the correct paper size. If the size is displayed correctly on the display, then replace transport sensor 3.