mp9002 sc 142

[en.]

hi all

i have problem with ricoh mp9002 its give me code sc142 directly after i turned the power switch

i checked and do all this action

1: cleaned all optic section and mirror + lens +lamp is working

2- cleaned all white plate and ex poser class for scanner and feeder

3- checked all connector and harness

but still give me these code any one can help me

best regards

[keithxxiii]

Re: mp9002 sc 142

1.JPG
Try to check the boards and swap them if you have some spare.
Could be the IPU

[en.]

Re: mp9002 sc 142

[ATTACH=CONFIG]33573[/ATTACH]
Try to check the boards and swap them if you have some spare.
Could be the IPU

thanks my friends for your responding

this is a problem i don't have spare part for it >>is the mp9001 is the same part for scanner ?

[slimslob]

Re: mp9002 sc 142

When you first turn the MP 9002 on, does the scanner move to below the white reference and the lamp turn on?

[en.]

Re: mp9002 sc 142

When you first turn the MP 9002 on, does the scanner move to below the white reference and the lamp turn on?

Yes my frinde scanner motor is working and lamp is on

[whitecat]

Re: mp9002 sc 142

Disconnect scanner from machine , and give it a try . SC`s on this machine are misleading . Who made the service manual has high/drunk, idk.