Picked up a MPC 3002 off lease. When powered on screen says " ,hard disc replaced, needs formatted" execute format and then SC 672-000.
If I disconnect the hard drive, system comes to ready and functions ( no scan function ) I figure this means the controller is ok.
I notice the hard drive with the MPC 3002 is 100GB, where specs call for 190GB. ( I don't have a 190 GB or larger to test with ) Is this "smaller hard drive
causing the SC 672 ? and do I have to use a 190 GB to repair , or can I go larger ?
If I disconnect the hard drive, system comes to ready and functions ( no scan function ) I figure this means the controller is ok.
I notice the hard drive with the MPC 3002 is 100GB, where specs call for 190GB. ( I don't have a 190 GB or larger to test with ) Is this "smaller hard drive
causing the SC 672 ? and do I have to use a 190 GB to repair , or can I go larger ?
Comment