ft 4822

[Gab]

I know , i know ys old etc but the customer...
I replaced developer , performed sp 4001, 4201 , 3106 but the image is too light . Any idea?

[gkalman2004]

Re: ft 4822

I know , i know ys old etc but the customer...
I replaced developer , performed sp 4001, 4201 , 3106 but the image is too light . Any idea?

A214 — Ricoh FT4822, Savin 9122DL
Sorry i don't understand you performed what??
3-106 Displays the initial VLP/VLG value determined by SP3-105.
4-001 Exposure Lamp Voltage Adjustment
4-002 Exposure Lamp Voltage Display
4-201 Auto ADS Gain Adjustment

When you change developer
y107r
-you must do TD initial settings with 2-214 and start key (machine will work 2-3 minutes).
y twice
-you must do twice Compulsory toner supply with 2-207 and start key (machnine first will work 30 seconds after and you repet once again)
y key three times to exit SP mode

[bob marley]

Re: ft 4822

I replaced developer , performed sp 4001, 4201 , 3106 but the image is too light . Any idea?

sp 2-214 (TD Sensor initial setting)
2-207 ( Forced toner supply)
2-001 (Drum charge voltage adjustment ) 0 - 32 Default: 16
2-003 (Drum charge Voltage adjustment) 0 - 32 Default: 16
4-001 (Exposure lamp voltage adjustment) 50.0 - 75.0 V default = 63 V
4-008 (Vertical magnification adjustment ) 0 - 32 V default = 16
also perform sp 3-001 (ID sensor initial setting)