Mpc4000

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • devontug
    Technician

    Site Contributor
    50+ Posts
    • Apr 2015
    • 99
    #1

    Mpc4000

    Who can tell me what is wrong with this printer see attachment

    It copy's fine but the menu is distorted don't Kno why IMG_1766.JPG


    Sent from my iPhone using Tapatalk
    Tags: None
    • DougD
      2020 Retired

      50+ Posts
      • Sep 2016
      • 76
      #2
      Re: Mpc4000

      I will hazard a guess that someone has managed to load the wrong firmware on the machine.
      I know it's not supposed to be possible but a machine we purchased from a used equipment broker had a similar problem.

        Comment

        • slimslob
          Retired

          Site Contributor
          25,000+ Posts
          • May 2013
          • 36850
          #3
          Re: Mpc4000

          Reload all firmware modules, or at least LCDC, Engine and System. If this does not correct the problem, you will need to replace the driver board for the LCDC.

            Comment

            • devontug
              Technician

              Site Contributor
              50+ Posts
              • Apr 2015
              • 99
              #4
              Re: Mpc4000

              I have no firmware for this machine can anyone point me in the direction to download it if downloading is possible really new to Ricoh or is it possible someone could send the needed file ... Hope I didn't breach any rules by this request ... Thanks for the support guys


              Sent from my iPhone using Tapatalk

                Comment

                • DougD
                  2020 Retired

                  50+ Posts
                  • Sep 2016
                  • 76
                  #5
                  Re: Mpc4000

                  I would suggest that you first print out the SMC diagnostic report 5990-005 and look at the part numbers for the firmware modules.
                  Most will have the D025 & D029 prefix and a couple may start with D393 or D413.
                  If something is really off like B101 or B147 then you have a firmware problem.
                  If everything looks okay then swapping control panels would be your next logical step.

                    Comment

                    • devontug
                      Technician

                      Site Contributor
                      50+ Posts
                      • Apr 2015
                      • 99
                      #6
                      Re: Mpc4000

                      Ok will do


                      Sent from my iPhone using Tapatalk

                        Comment

                        Previous template Next
                        Working...