The 1. GRIFFIN C-3 / MPC 307 in the shop!

[Zeldaman]

Hi there!
30 minutes before i get the 1. MPC 307 on the desk. On the first side the engine looks identical to the 306 xmt the new SPDF. Toner the same, and only 8(!!!) screws on the backplate. But look at the new cable coming from the feeder (red arrow). The portion at the green arrow is folded 6 times! Firmware is also another one, until now no package availible. After the 1. tests i call again.
Greetings...

[Zeldaman]

Re: The 1. GRIFFIN C-3 / MPC 307 in the shop!

Hi there!
Update: new scanner-housing & the CIS of the feeder, god to clean.
Greetings...

[Cipher]

Re: The 1. GRIFFIN C-3 / MPC 307 in the shop!

Oh joy, another model... barely had chance to sell the 306.

Was going to say they just changed the badge, but I guess a SPDF is a improvement (the price tag isn't though).

[copier tech]

Re: The 1. GRIFFIN C-3 / MPC 307 in the shop!

305,306 & now a 307 why not redesign a completely new model!

Single pass DF on a desktop machine that's a recipe for disaster!