Ive been working on this machine for a few days now and it has the SC code listed in the title. I replaced the developer as the manual suggests and no go. I had someone suggest replacing some rollers on the ITB like the bias roller and did that and no go. What could this possibly be? The power pack? The LD unit?
-
-
Re: Ricoh C6502 - 402-54
Next step would be dev unit, it's a gamma output error.It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.
Hit it. -
Re: Ricoh C6502 - 402-54
Youll have to pardon my ignorance on the subject but in what way would the dev unit be defective?Comment
-
Re: Ricoh C6502 - 402-54
I boiled it down to the yellow pcdu at least from sp 3012-001. So i should replace the whole dev unit at this point? I dont think theres anything else to check, really.Comment
-
Re: Ricoh C6502 - 402-54
I believe i found my smoking gun. Swapping the td sensor made the machine change error states. Turning off gamma correction allows the machine to print albeit a bit light. The TD sensors seem to be at the heart of the issue.Comment
-
Re: Ricoh C6502 - 402-54
Replacing the potential sensor that sits above the PCDU solved this as I suspected it would. A shame I spent and entire shift driving there and back.Comment
Comment