Ricoh mp 6000

[Transam1]

I have an mp 6000 first copy or print out is blurry down 1 side but all following are ok
this happins when coming out of sleep mode.

[TonerMunkeh]

Re: Ricoh mp 6000

What sort of count do the PM parts have on them? Could be a cleaning problem, sticky blade perhaps.

[mikadonovan]

Re: Ricoh mp 6000

Depending on the humidity level of the environment, it could be condensation forming on the drum.

[Transam1]

Re: Ricoh mp 6000

What sort of count do the PM parts have on them? Could be a cleaning problem, sticky blade perhaps.

Thanks i will check

[Mark Bbb]

Re: Ricoh mp 6000

typical issue with old ricoh's. Cold start, warm start issue...
There was a RTB for an old model, which I don't remember anymore...
There was an SP mode that should be changed; I think it was in the manner of which way the fusing lamp get it's power:
linear or ???
Firmware upgrade might help.
You can test to put the machine main switch off in stead of let in go in eco mode, same issue?

[slimslob]

Re: Ricoh mp 6000

What sort of count do the PM parts have on them? Could be a cleaning problem, sticky blade perhaps.

Or charge corona/drum too far past PM cycle.

[MIKON]

Re: Ricoh mp 6000

Get out your vac
PCU and Developer Probably needs a good Douching