Jamming issue MPC2000 (a, b, c, d, z)

[copier tech]

Re: Jamming issue MPC2000 (a, b, c, d, z)

Looking at the state of this machine, I firstly give the machine a good PM, by that I mean remove all main items & CLEAN CLEAN CLEAN! especially the sensors.

It is also a good idea to update the firmware while you're at it.

My first thought is that when you had the machine apart you dislodged some dust etc & it is now blocking a sensor.

[Oneplus 2]

Hello.
Today i received 2 pairs of new door switches.
I replaced them, and turned the machine on.
Yet, the paper jam and door open alert persists.

Im struggling with this from say 3 months. Customer bombarding me, and so is my boss.
So any help would be appreciated. Thanks again

[Iowatech]

Re: Jamming issue MPC2000 (a, b, c, d, z)

Dust? What Dust?
If this is the state of the outside of the machine after working on it for 3 weeks, I can only imagine what the inside looks like -no wonder it has some issues!

This is a piece of trim that fits over the support bar at the far left end of the tray
[ATTACH=CONFIG]35939[/ATTACH]

I completely missed that. Do'h.

[Oneplus 2]

That LED normally indicates that there are prints in that tray. As there is nothing in the tray sandmanmac is right. As I didn't see any obvious problems with the tray, I'd check to see if the sensor is full of dust first though.

Dust? What Dust?
If this is the state of the outside of the machine after working on it for 3 weeks, I can only imagine what the inside looks like -no wonder it has some issues!

This is a piece of trim that fits over the support bar at the far left end of the tray
1 Bin.jpg

Yeah image my position whike im dealing with machines like this. Anyway ive got used to this. 'dust' is a very common issue bere in india. Yet, we have people like you to help us if in trouble. Thanks sir

[Oneplus 2]

Hello. Yes youre right it was dusty before. Now it has stopped.

[Oneplus 2]

Hello. Yes,it was loads of dust. Now the green light is gone. 1 reason less to worry.
Thanks for advice

[sandmanmac]

Re: Jamming issue MPC2000 (a, b, c, d, z)

That LED normally indicates that there are prints in that tray. As there is nothing in the tray sandmanmac is right. As I didn't see any obvious problems with the tray, I'd check to see if the sensor is full of dust first though.

Dust? What Dust?
If this is the state of the outside of the machine after working on it for 3 weeks, I can only imagine what the inside looks like -no wonder it has some issues!

This is a piece of trim that fits over the support bar at the far left end of the tray
1 Bin.jpg

[Iowatech]

Re: Jamming issue MPC2000 (a, b, c, d, z)

That LED normally indicates that there are prints in that tray. As there is nothing in the tray sandmanmac is right. As I didn't see any obvious problems with the tray, I'd check to see if the sensor is full of dust first though.

[sandmanmac]

Re: Jamming issue MPC2000 (a, b, c, d, z)

Hello,

can you please tell me as to why this green led has started to blink.

yeah!......There's a piece of the tray assembly sitting on top of paper sensor!
Either that, or it's just so filthy that the sensor itself is covered in it, and malfunctioning!

[Oneplus 2]

Re: Jamming issue MPC2000 (a, b, c, d, z)

The small push button switches used on some of the doors will break contact momentarily during operation and cause J001.

Hello,

Im still trying to find the switches, so ill post if something comes in.

Also, need your help.

can you please tell me as to why this green led has started to blink.
Also, please view the other images and i'd be glad to hear what you'd say on that.

[Oneplus 2]

Hello.
As im in India its difficult to fetch one of these switches. Will report the outcome if at all i find a switch. Lol!

[Oneplus 2]

Slimsob,
I will change the switches to check if it works.
Thanks

[slimslob]

Re: Jamming issue MPC2000 (a, b, c, d, z)

Slimsob,
Thanks for the information

Yesterday i had opened the switches to check them.
Both are fine. As i checked them thru the multimeter. (digital)

So, any advice on how to proceed with this?

The small push button switches used on some of the doors will break contact momentarily during operation and cause J001.

[Oneplus 2]

Slimsob,
Thanks for the information

Yesterday i had opened the switches to check them.
Both are fine. As i checked them thru the multimeter. (digital)

So, any advice on how to proceed with this?

[slimslob]

Re: Jamming issue MPC2000 (a, b, c, d, z)

Slimsob, thd jam location is J001

J001 is a jam at power on. If it is the initial jam code then you have a problem with a door switch. It will also be shown when there is still a jam after the door has been opened and closed.