Will a mpc3501 hdd work in a mpc3502?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • fshead
    Service Manager

    1,000+ Posts
    • Jan 2009
    • 2366
    #1

    Will a mpc3501 hdd work in a mpc3502?

    greetings.
    I just purchased my 1st 02 series ricoh colors and have an sc 860/870 and formatting the HDD
    failed which I am assuming the customer pulled the HDD.
    I havent opened the controller yet but figured I d ask here.
    thanks
    Tags: None
    • slimslob
      Retired

      Site Contributor
      25,000+ Posts
      • May 2013
      • 37382
      #2
      Re: Will a mpc3501 hdd work in a mpc3502?

      If the machine boots but just displays the SC at the bottom of the screen, enter System SP mode and print the diagnostic page, SP-5990-005. It should show if there is a HDD.

        Comment

        • sandmanmac
          Field Supervisor

          Site Contributor
          2,500+ Posts
          • Feb 2009
          • 3979
          #3
          Re: Will a mpc3501 hdd work in a mpc3502?

          There's nothing special about Ricoh HDD's. Any off-the-shelf HDD will work -so long as it's AT LEAST the size of the original. Larger caocity is OK

            Comment

            • fshead
              Service Manager

              1,000+ Posts
              • Jan 2009
              • 2366
              #4
              Re: Will a mpc3501 hdd work in a mpc3502?

              Originally posted by slimslob
              If the machine boots but just displays the SC at the bottom of the screen, enter System SP mode and print the diagnostic page, SP-5990-005. It should show if there is a HDD.
              thanks.
              i never run these machines till i pull all the units out and inspect for any screws,paper clips or staples
              that might wipe out a drum or ITB..I learned that the hard way way back.
              I pulled the back and no HDD but they did leave the 2 connectors so I am happy.
              Just found a 250 gig drive on my shelf and will try that..I think the mpc3501 used a 320gig but dont know the 02s as
              no manual yet here

                Comment

                • mikedci
                  Trusted Tech

                  100+ Posts
                  • Jul 2010
                  • 227
                  #5
                  Re: Will a mpc3501 hdd work in a mpc3502?

                  When they first came out they had 250 GB HDD's so your 250 GB should be fine. Ricoh did update the part's manual to 320 GB drives.

                  201504-01 1504 Modification - D1425765 HDD:TOSHIBA:25O/O Model At-C3: M4445201 HDD:320GB:AQUARIUS

                    Comment

                    • fshead
                      Service Manager

                      1,000+ Posts
                      • Jan 2009
                      • 2366
                      #6
                      Re: Will a mpc3501 hdd work in a mpc3502?

                      Originally posted by mikedci
                      When they first came out they had 250 GB HDD's so your 250 GB should be fine. Ricoh did update the part's manual to 320 GB drives.

                      201504-01 1504 Modification - D1425765 HDD:TOSHIBA:25O/O Model At-C3: M4445201 HDD:320GB:AQUARIUS
                      THNX
                      I opened up my other 3502 and see its a 250gig sata laptop drive..

                      Toshiba 250GB Internal 5400RPM 2.5" (MK2575GSX)

                        Comment

                        • fshead
                          Service Manager

                          1,000+ Posts
                          • Jan 2009
                          • 2366
                          #7
                          Re: Will a mpc3501 hdd work in a mpc3502?

                          I ended up swapping out a hard drive from my mpc 3002 and machine came up
                          with a message showing HDD swapped out and the a SC 876-05
                          "Installed NVRAM or HDD which is used in another machine"..
                          Installed NVRAM or HDD which is used in another machine
                          1. Reinstall the previous NVRAM or HDD.
                          2. Initialize the HDD with SP5832-004.

                          after option 2 it seems fine.

                            Comment

                            • fshead
                              Service Manager

                              1,000+ Posts
                              • Jan 2009
                              • 2366
                              #8
                              Re: Will a mpc3501 hdd work in a mpc3502?

                              Originally posted by fshead
                              I ended up swapping out a hard drive from my mpc 3002 and machine came up
                              with a message showing HDD swapped out and the a SC 876-05
                              "Installed NVRAM or HDD which is used in another machine"..
                              Installed NVRAM or HDD which is used in another machine
                              1. Reinstall the previous NVRAM or HDD.
                              2. Initialize the HDD with SP5832-004.

                              after option 2 it seems fine.
                              i just installed a used but tested 250 gig seagate sat laptop drive in mpc3002.
                              upon start up machine knew and asked me to format it on screen and then reboot/restart and DONE..easy

                                Comment

                                Previous template Next
                                Working...