MPC7501 not reading new toner

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • digicor
    Service Manager

    1,000+ Posts
    • Jul 2008
    • 1153
    #1

    MPC7501 not reading new toner

    First off , im not a big fan of these machines,
    I put a new K toner in and the meter didnt move off of under 20% replace soon, I put the bag in correctly(OEM) and so forth, is there any other way around this stupid chip in the bag? can i just manually tell it it has a new toner? i did not re-boot the machine, but ive not ever had to do that.
    Is there any solution to this ? it reads the bag at least but the meter still stays the same...It has the latest firm ware ,
    thanks
    Tags: None
    • TonerMunkeh
      Professional Moron

      2,500+ Posts
      • Apr 2008
      • 3865
      #2
      Re: MPC7501 not reading new toner

      Oh dear, the infamous Venus add toner. Prepare yourself.

      Set SP 3410-001 to 10 and reboot.
      If that doesn't fix it, back up it's NVram, engine clear it, re-upload the NVram, set the above SP mode back to 10 and reboot.
      If that still doesn't fix it, re-dev it.
      If that still, still doesn't fix it, take a deep breath and order a toner pump.
      It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

      Hit it.

        Comment

        • digicor
          Service Manager

          1,000+ Posts
          • Jul 2008
          • 1153
          #3
          Re: MPC7501 not reading new toner

          thanks man

            Comment

            Previous template Next
            Working...