Hi i got a older copier, i have never really been around a lot of Lanier copiers, anyway the power code looks like the ones that come with dryer the 3 prongs look like they are 220v, what kind of adapter of outlet do i need in order to operate this?, any suggestions are welcome.
-
-
I'm not familiar with that model, but the operators manual states the line should be a 20 amp circuit. If you could take a picture of it we could confirm the type for you.the savin2535 is displaying well bet the hiter lamp is not shining and the lamp had been tested o.k.please kindly help.Samir: No, not again. I... why does it say paper jam when there is no paper jam? I swear to God, one of these days, I just kick this piece of shit out the window.
Michael Bolton: You and me both, man. That thing is lucky I'm not armed. -
here is the picture.
Comment
-
It is a 110v 20 amp dedicated plug.
Go to a hardware store and get the female end of the 20 amp and male end of 15 amp plug.
Solder a thick gauge wire to each end and you have what we used to call a pig tail.
As long as machine doesn't pop breakers it will be OK.Why do they call it common sense?
If it were common, wouldn't everyone have it?Comment
-
For this non-Ricoh Lanier machine, the power specs are: 115v 20 amp, 50/60 Hz.Comment
-
ok thanks i went to the hardware store and the guy showed me the wall plug that i need, and i think i might need to get a breaker for it, thanks!Comment
Comment