[Dead] savin 2535 will not power up

[nicks]

Hello, I work for a dying company and I do little things around the office here to save money. We have been in need of another copy machine. SO im looking into resurrecting the old dinosaur savin 2535. Where do I start then the unit will not power up at all. The light beside the power button does not light up when it is plugged in. I opened up the back of it and I don't see fuses like I would of expected.

Any help would be greatly appreciated. Thanks Nick

[fshead]

Re: savin 2535 will not power up

it would be dangerous here to tell a non tech how to navigate a power up issue where you could
possibly get shocked..
Give a lawyer any reason to litigate...
why not look online to find a cheap used copier..
maybe here has a deal for you..

[nicks]

Re: savin 2535 will not power up

AH, Well I build computers, I'm an electrician, modular home designer, plumber,,etc.. I fixed the old 8035 just the other day. I can sign a waver if that helps.

Any advice given to me by this board will be used at my own risk, and the board will not be held responsible. Signed, Nick Shay.

[mikadonovan]

Re: savin 2535 will not power up

Blown fuses FU101 and FU102 on the power supply (PSU) will cause a no response condition.

[nicks]

Re: savin 2535 will not power up

Blown fuses FU101 and FU102 on the power supply (PSU) will cause a no response condition.

the sorter needs to be removed to get to the psu. any tips on that?

[mikadonovan]

Re: savin 2535 will not power up

Totally depends on the finisher. Nothing special, finishers are meant to be removed easily. Normally unplug the connector and pull the hook release bar out on a sr790.