Customer is getting "wet edges" on some papers when they come out...fuser? Any thing else it could be?
-
-
Re: MP C3001
There is only one thing that can cause this, damp paper. The steam from the paper as it exits the fuser collects & gets transferred to the paper. Very common in high humidity countries.Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
-
Re: MP C3001
I agree with copier tech, I have seen this more than once.Comment
-
Re: MP C3001
yea thanks guys thats what i figured...just wanted to be sure to do my due diligence for the customerComment
-
Re: MP C3001
I saw this a on the MPC305 recently, the condensation was so bad it was literally running down the front cover lolLet us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Comment
-
Re: MP C3001
Always check ventilation:
channel net is covered with dust
or is blocked due to positioned against a wall.Comment
Comment