Ricoh mpc5503 oven rolls changed. The machine can not cook the first 20-25 copies of toners when it opens in the morning. No problems in subsequent shoots. What could be the reason?
Thank you
Thank you
-
-
Re: Ricoh mpc5503 toner is not cooked
Are you using genuine toner?Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
-
Re: Ricoh mpc5503 toner is not cooked
Hi there!
You changed sleeve-roller & pressroller????? Check the lamps of the sleeve-roller.
Greetings...Comment
-
Re: Ricoh mpc5503 toner is not cooked
The toner is originalComment
-
Re: Ricoh mpc5503 toner is not cooked
Lamps are sturdy, new thermistorsComment
-
Re: Ricoh mpc5503 toner is not cooked
you might have some rings on the lamp wires that are not connected .. take the fuser apart .. inspect the wires and rings around them if some are not connected replace that lamp..also clean the thermisistors see if there is toner build up on them
both issues may not kick an error code.
did you do a nip check on the fuser?Comment
-
Re: Ricoh mpc5503 toner is not cooked
The lamps and thermistors were replaced with another machine to make sure. It was found that the fault continued. Only when the machine is opened in the morning it is making the trouble. Copying is improving after 20-25 copies and no further probing is found. The machine is in trouble for the first time after it has been closed for a long time.Comment
-
Comment
-
Re: Ricoh mpc5503 toner is not cooked
Also update all firmwareComment
-
Re: Ricoh mpc5503 toner is not cooked
Ricoh has published a technical bulletin for such a problem. I made changes to the value given to it and tried to test the machine.
Thank youComment
Comment