MP 1100

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Domingos
    • May 2025
    #1

    MP 1100

    Can you help me, is there a way to downgraded frimware on a MP1100. as after installing the new frimware we have extra problems
    Tags: 1100, 513, downgraded, question, risk, stalling, symptoms, tsc
    • Voltage
      Trusted Tech

      250+ Posts
      • Jul 2008
      • 282
      #2
      Not that i know of. Maybe i can help with some of the problems?

        Comment

        • Domingos
          #3
          Nice to see a reply from RSA, as an expratiot, but the problem is that when we up-dated the frimware, we now have a stack of problems with SC990 and Sc670 codes

            Comment

            • RebelPhoenix
              Trusted Tech
              • Oct 2008
              • 138
              #4
              Dear Domingos.

              When will you want to a firmware update this copier it's time you must update is first engine software. When will you machine show the " Update sussecfly. " It's time you must click the off after on after you must the other firmwares update.
              Do you have this machine last firmware ? If You don't have please says it I upload the a sharing sites for you.

                Comment

                • cobiray
                  Passing Duplication Xpert

                  1,000+ Posts
                  • Mar 2008
                  • 1199
                  #5
                  Also make sure you update ALL the firmware and not just the Engine and System. I've had some of the most recent generations exhibit strange symptoms (codes, jamming, unable to enter tech mode) when not updating all the firmware.
                  the savin2535 is displaying well bet the hiter lamp is not shining and the lamp had been tested o.k.please kindly help.
                  Samir: No, not again. I... why does it say paper jam when there is no paper jam? I swear to God, one of these days, I just kick this piece of shit out the window.
                  Michael Bolton: You and me both, man. That thing is lucky I'm not armed.

                    Comment

                    • Shadow1
                      Service Manager

                      Site Contributor
                      1,000+ Posts
                      • Sep 2008
                      • 1642
                      #6
                      Ricoh usually keeps a current and previous version on the tsc web site - but as was mentioned, make sure you update EVERYTHING starting with system and engine. For those particular SC codes you might want to try formatting and / or replacing the HDD's
                      73 DE W5SSJ

                        Comment

                        • RebelPhoenix
                          Trusted Tech
                          • Oct 2008
                          • 138
                          #7
                          Hi Dear Shadow.

                          I don't understand. And I'm worry. We must the update first one System with engine firmware or first one only engine firmware after update the other firmware ?

                            Comment

                            • Shadow1
                              Service Manager

                              Site Contributor
                              1,000+ Posts
                              • Sep 2008
                              • 1642
                              #8
                              73 DE W5SSJ

                                Comment

                                • FRIDGEMAGNET
                                  Trusted Tech

                                  250+ Posts
                                  • Aug 2007
                                  • 377
                                  #9
                                  Originally posted by Shadow1
                                  Not sure why - I assume there may be some conflict between versions of firmware - but that is the procedure outlined in TSB 046 for the machine:
                                  The reason is that with the new firmware you are upgrading the machine from a MP1100 to the Pro110 (Katana C1 to Katana C1.5).
                                  If you upgrade the system firmware first, the machines thinks it is a C1.5 and sees a C1 engine firmware and locks itself out.
                                  This means that ALL the other firmware needs to be updated to these levels:
                                  If all these are not done then you can get some very wierd problems - Please Wait, Unable to access SP mode, parts of the screen missing and SC codes.
                                  Attached Files

                                    Comment

                                    • Domingos
                                      #10
                                      Much appreciated your input, it helped in solving the situation.


                                        Comment

                                        Previous template Next
                                        Working...