SR3090 doc feeder

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Qball
    Trusted Tech

    100+ Posts
    • Jun 2013
    • 127
    #1

    [Jamming] SR3090 doc feeder

    Has anyone else been dealing with these feeders and the weak feed units they employ? Feeds initially then original stops just after the sep roller.




    Sent from my iPhone using Tapatalk
    Tags: None
    • Qball
      Trusted Tech

      100+ Posts
      • Jun 2013
      • 127
      #2
      Re: SR3090 doc feeder

      Originally posted by terramobil
      SR3090 is a finisher, why do you want to insert originals there?
      Son of a... I got that all wrong, didn't I? I'm talking about the double pass doc feeder on the MP C3003.


      Sent from my iPhone using Tapatalk

        Comment

        • Coptech
          worker drone

          250+ Posts
          • Dec 2009
          • 460
          #3
          Re: SR3090 doc feeder

          I have heard of people wrapping a round of electrical tape around the barrel roller that drives the feed belt. I have not tried it. I think there is a bulletin with a slightly larger diameter barrel roller but I don't think part is available yet. Same old same old...

            Comment

            • slimslob
              Retired

              Site Contributor
              25,000+ Posts
              • May 2013
              • 37049
              #4
              Re: SR3090 doc feeder

              Only problem I have had on the Cxx03 document feeders is the edges of the feed belt fraying. Have had the problem on both the SPDF and the ARDF.

                Comment

                • ruben
                  The New Guy

                  1,000+ Posts
                  • Oct 2012
                  • 1203
                  #5
                  Re: SR3090 doc feeder

                  Originally posted by Qball
                  Has anyone else been dealing with these feeders and the weak feed units they employ? Feeds initially then original stops just after the sep roller.




                  Sent from my iPhone using Tapatalk
                  Seen this a hundred times. Had Ricoh engineer out to check what could be causing it, but even they couldn't figure it out. In the end, we replaced the complete feed assembly: D684-2100, and the problem was cured instantly.

                  Note: The part has since been modified, but the old part number is still being used. If you order the assembly, and get two white rollers inside the belt, that is the new assembly; the older assembly has either both black rollers (03 range) or one black and one white (04 range).

                  Both 03 and 04 have the same DF fault, so both will need new assemblies.

                  See also: http://www.copytechnet.com/forums/ri...tml#post512310

                    Comment

                    • Qball
                      Trusted Tech

                      100+ Posts
                      • Jun 2013
                      • 127
                      #6
                      Re: SR3090 doc feeder

                      Originally posted by ruben
                      Seen this a hundred times. Had Ricoh engineer out to check what could be causing it, but even they couldn't figure it out. In the end, we replaced the complete feed assembly: D684-2100, and the problem was cured instantly.

                      Note: The part has since been modified, but the old part number is still being used. If you order the assembly, and get two white rollers inside the belt, that is the new roller; the older roller has either both black rollers or one black and one white.

                      See also: http://www.copytechnet.com/forums/ri...tml#post512310
                      That's exactly what I did on these two gems I worked on. Good to know about the updated part.


                      Sent from my iPhone using Tapatalk

                        Comment

                        Previous template Next
                        Working...