Mpc3500 print from computer very dark

[lawchatkui]

All. Pro, anyone know where can I make the adjustments for mpc3500 if the print out from computer the results turn out to be very dark in color as compare to the Original photo?

As in copying mode, I can do the lighten adjustment, but print from computer, where is the way to rectify it? Tq

Sent from my Mi 4i using Tapatalk

[TonerMunkeh]

[Phil B.]

Re: Mpc3500 print from computer very dark

depending on the operating system... and which print driver you are using, the print driver might have a limited set of controls.

are you an end user or tech?

[lawchatkui]

Re: Mpc3500 print from computer very dark

Yeah I see, but the copying of photo with the lighter the color print out quite acceptable. So pro could you enlighten the where can I amend it when Printing from computer? In toner save mode?

Sent from my Mi 4i using Tapatalk

[lawchatkui]

Re: Mpc3500 print from computer very dark

depending on the operating system... and which print driver you are using, the print driver might have a limited set of controls.

are you an end user or tech?

I m tech

Sent from my Mi 4i using Tapatalk

[lawchatkui]

Re: Mpc3500 print from computer very dark

depending on the operating system... and which print driver you are using, the print driver might have a limited set of controls.

are you an end user or tech?

The driver use mpc3500 pcl6

Sent from my Mi 4i using Tapatalk

[Phil B.]

Re: Mpc3500 print from computer very dark

you would make adjustments in color mode and save that profile...

[lawchatkui]

Re: Mpc3500 print from computer very dark

you would make adjustments in color mode and save that profile...

Pro, seem that only with option true24bit color & monochrome

Sent from my Mi 4i using Tapatalk

[lawchatkui]

Re: Mpc3500 print from computer very dark

you would make adjustments in color mode and save that profile...

I can't find anyway to lighter the color contrast, or can u advise me where can I make the adjustments in SP mode? Thanks

Sent from my Mi 4i using Tapatalk

[Phil B.]

Re: Mpc3500 print from computer very dark

you would have to go to the manual for that

[lawchatkui]

Re: Mpc3500 print from computer very dark

I hv manual but not quite sure where should I starting from, quite confused, haha, anyway thank you pro

Sent from my Mi 4i using Tapatalk

[davel]

Re: Mpc3500 print from computer very dark

clean optics and music sensors when you find them do line position adjustment then ACC for copy and all printer modes.

[lawchatkui]

Re: Mpc3500 print from computer very dark

clean optics and music sensors when you find them do line position adjustment then ACC for copy and all printer modes.

Davel, sorry may I know where is the music sensor located? Thanks

Sent from my Mi 4i using Tapatalk

[slimslob]

Re: Mpc3500 print from computer very dark

You can start with Auto Color Calibration in User Tools. As always, clean optics first, then run ACC for copying to calibrate the scanner then run all printer ACC.

Try installing the RPCS driver and turning on Toner saving.

[sturmtrooper]

Re: Mpc3500 print from computer very dark

Printer SP 1106 will allow you to adjust the toner limit for printing. Reducing the number reduces the max toner amount.