Mp 6500

[andywong90]

Guys, what problem ricoh mp6500 reading vsp 5.0 ，copy out blur

[andy227]

Re: Mp 6500

ID sensor output is abnormal when Vsp showing 5. Pull out the drum assembly and check the ID sensor, it may be covered in toner, the toner may be so piled up high on the guide that it touches the drum, and hence the blurry copies. Clean it out, and re-check. If the same, try another sensor/drum assembly, and possibly the drum itself.

[jonhiker]

Re: Mp 6500

Pull out the dv unit and the pcu. clean the pcu unit. also, check an clean what they call the classification assy, it is the clear plastic thing on top of the toner supply unit. Then, run a few partial sky shots and see if it then re-balances the vsp/vsg. You may need to change the developer.

[hsh6049]

Re: Mp 6500

[QUOTE=jonhiker;573422]Pull out the dv unit and the pcu. clean the pcu unit. also, check an clean what they call the classification assy, it is the clear plastic thing on top of the toner supply unit. Then, run a few partial sky shots and see if it then re-balances the vsp/vsg. You may need to change the developer.[/QU

hi may i know what is the PCU ? i am also facing the same problem with the reading suddelny vsp&vsg reading 5.0

[davel]

Re: Mp 6500

[QUOTE=hsh6049;580937]

Pull out the dv unit and the pcu. clean the pcu unit. also, check an clean what they call the classification assy, it is the clear plastic thing on top of the toner supply unit. Then, run a few partial sky shots and see if it then re-balances the vsp/vsg. You may need to change the developer.[/QU

hi may i know what is the PCU ? i am also facing the same problem with the reading suddelny vsp&vsg reading 5.0

If you have to ask what is pcu you are not a technician, call a real tech.

[hsh6049]

Re: Mp 6500

[QUOTE=davel;580945]

If you have to ask what is pcu you are not a technician, call a real tech.

we name pcu unit.as drum unit

[Phil B.]

Re: Mp 6500

[QUOTE=hsh6049;580937]

Pull out the dv unit and the pcu. clean the pcu unit. also, check an clean what they call the classification assy, it is the clear plastic thing on top of the toner supply unit. Then, run a few partial sky shots and see if it then re-balances the vsp/vsg. You may need to change the developer.[/QU

hi may i know what is the PCU ? i am also facing the same problem with the reading suddelny vsp&vsg reading 5.0

ARE YOU A TECH?