MPC 4503 DF problem

[FrohnB]

Re: MPC 4503 DF problem

TimmyTronic, I can't get any pictures to upload on this site. If you give me an email address, I can e-mail you the pictures.

[Timmytronic]

Re: MPC 4503 DF problem

TimmyTronic, I can't get any pictures to upload on this site. If you give me an email address, I can e-mail you the pictures.

Hi

That's great, thank you. kopyrite.print@btinternet.com

Hope you are having a good day.

[slimslob]

Re: MPC 4503 DF problem

TimmyTronic, I can't get any pictures to upload on this site. If you give me an email address, I can e-mail you the pictures.

They are most likely too large. For future reference, when you are in the attachments window there is a ? in the upper right hand corner. Click on it and it will open a list of allowed file types and their max size width and height. Generally for image files it is 976.6 KB and 620X280. Usually I use IrfanView to adjust width and height to withn the specs. That usually gets the file size small enough.

[FrohnB]

Re: MPC 4503 DF problem

Okay, let's try this picture thing again. Size may have been way too big.
ADF3.jpg

ADF4.jpg

[slimslob]

Re: MPC 4503 DF problem

Okay, let's try this picture thing again. Size may have been way too big.
[ATTACH=CONFIG]37840[/ATTACH]

[ATTACH=CONFIG]37841[/ATTACH]

Came through fine. Had to scroll back to your original reply to see what I was looking for, but I did see the slip of paper.