Mpc4500 fine line duplex only

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mrfuser
    Service Manager

    Site Contributor
    1,000+ Posts
    • May 2007
    • 1598
    #1

    Mpc4500 fine line duplex only

    Lead edge about 1/4 inch in a fine line going op to non op direction. Any ideas? Tried adjust in service mode and nothing changes doing lead edge and such.
    Tags: edge, fine, lead, line, service
    • DRichard
      Trusted Tech

      250+ Posts
      • May 2008
      • 482
      #2
      Re: Mpc4500 fine line duplex only

      Originally posted by mrfuser
      Lead edge about 1/4 inch in a fine line going op to non op direction. Any ideas? Tried adjust in service mode and nothing changes doing lead edge and such.
      Side two margin(s) in user tools set to zero?
      "Enjoy every sandwich."

      -- Warren Zevon

        Comment

        • mrfuser
          Service Manager

          Site Contributor
          1,000+ Posts
          • May 2007
          • 1598
          #3
          Re: Mpc4500 fine line duplex only

          Yep already checked


          Originally posted by DRichard
          Side two margin(s) in user tools set to zero?

            Comment

            Previous template Next
            Working...