RICOH SP4510sf reset completely a copier

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • MelMan
    Junior Member
    • Oct 2015
    • 5
    #1

    [Misc] RICOH SP4510sf reset completely a copier

    Hello, If any one can help i would appreciate it greatly. I have a RICOH SP4510sf copier, that I picked up on a lease repo and it is brand new with only 6 impression made on it, however it has a code/Password, which i cant seem to clear. I don't want to post anything on here as far as the step i have taken or code i have used only because of the protective comment about none techs on the site. I can say that i have tried some of the steps which have worked with the Ricoh 00, 01, 02 series of machine which has worked on those type of machine but not on this one.

    Admin /no password = failed
    Supervisor / No Password = failed
    Tags: copier, ricoh, sp4510sf, worked
    • Phil B.
      Field Supervisor

      10,000+ Posts
      • Jul 2016
      • 22798
      #2
      Re: RICOH SP4510sf reset completely a copier

      the service manual will have the steps required to clear passwords

        Comment

        • slimslob
          Retired

          Site Contributor
          25,000+ Posts
          • May 2013
          • 37493
          #3
          Re: RICOH SP4510sf reset completely a copier

          SP 5846-046 in factory SP mode. Otherwise you will have to replace NVram.

            Comment

            • MelMan
              Junior Member
              • Oct 2015
              • 5
              #4
              Re: RICOH SP4510sf reset completely a copier

              Thank you for the quick response, but i figured it out i was having an "ESTO" error....I working now

                Comment

                • MelMan
                  Junior Member
                  • Oct 2015
                  • 5
                  #5
                  Re: RICOH SP4510sf reset completely a copier

                  By any chance do you guys know how to set up the machine so that the meter reading is on the op-panel not in the config page?

                    Comment

                    • slimslob
                      Retired

                      Site Contributor
                      25,000+ Posts
                      • May 2013
                      • 37493
                      #6
                      Re: RICOH SP4510sf reset completely a copier

                      Originally posted by MelMan
                      By any chance do you guys know how to set up the machine so that the meter reading is on the op-panel not in the config page?
                      There is an SP setting for that.

                        Comment

                        • MelMan
                          Junior Member
                          • Oct 2015
                          • 5
                          #7
                          Re: RICOH SP4510sf reset completely a copier

                          Originally posted by slimslob
                          There is an SP setting for that.
                          Where? I have read the Manual and looked around and i can seem to find it....I did plug in the 1 in the accounting side but the actual Counter button on the copier does not show up

                            Comment

                            • slimslob
                              Retired

                              Site Contributor
                              25,000+ Posts
                              • May 2013
                              • 37493
                              #8
                              Re: RICOH SP4510sf reset completely a copier

                              Originally posted by MelMan
                              Where? I have read the Manual and looked around and i can seem to find it....I did plug in the 1 in the accounting side but the actual Counter button on the copier does not show up
                              If by accounting side you mean SP 5045, setting it to 1 will turn off the display counter.

                                Comment

                                • MelMan
                                  Junior Member
                                  • Oct 2015
                                  • 5
                                  #9
                                  Re: RICOH SP4510sf reset completely a copier

                                  Originally posted by slimslob
                                  If by accounting side you mean SP 5045, setting it to 1 will turn off the display counter.
                                  Sorry once again i had an "ESTO" error for rushing...I just needed to slow down and read...the tiny screen

                                    Comment

                                    Previous template Next
                                    Working...