Rex Rotary pro 1357ex copy quality issue.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • atech
    Technician

    50+ Posts
    • Aug 2010
    • 89
    #1

    [Misc] Rex Rotary pro 1357ex copy quality issue.

    I have copy quality issue for Rex Rotary pro 1357ex, the machine indicates toner replacement and both toner banks need new toner as it has two toner cartridge. I only replaced 1 and make a copy..the copy was good but after 2 weeks the copy becomes light. Now I need to run the toner replenishment every time the copy becomes light to make it dark. I am not familiar with this machine although it has similarities with Ricoh aficio 9000. Do I need to replace the developer? I need your valuable advice guys... Thanks..
    Tags: copy, light, make, rotary, toner
    • sturmtrooper
      Copier Combobulator

      500+ Posts
      • May 2016
      • 587
      #2
      Re: Rex Rotary pro 1357ex copy quality issue.

      Originally posted by atech
      I have copy quality issue for Rex Rotary pro 1357ex, the machine indicates toner replacement and both toner banks need new toner as it has two toner cartridge. I only replaced 1 and make a copy..the copy was good but after 2 weeks the copy becomes light. Now I need to run the toner replenishment every time the copy becomes light to make it dark. I am not familiar with this machine although it has similarities with Ricoh aficio 9000. Do I need to replace the developer? I need your valuable advice guys... Thanks..
      What's the meter on the developer and other pm parts? Is the ID sensor clean? Are they using the machine withing the expected volume of use?

        Comment

        • slimslob
          Retired

          Site Contributor
          25,000+ Posts
          • May 2013
          • 37059
          #3
          Re: Rex Rotary pro 1357ex copy quality issue.

          If Toner Supply Mode SP 2208 is set to 1, pixel count, machine will tend to under tone.

            Comment

            • atech
              Technician

              50+ Posts
              • Aug 2010
              • 89
              #4
              Re: Rex Rotary pro 1357ex copy quality issue.

              Originally posted by sturmtrooper
              What's the meter on the developer and other pm parts? Is the ID sensor clean? Are they using the machine withing the expected volume of use?
              The total copy is almost 1 million, around 960k. I think the machine has not been replaced with new developer ever since. Is it okay if only one toner bank is filled with toner and the other is empty or do I need to fill both?

                Comment

                • atech
                  Technician

                  50+ Posts
                  • Aug 2010
                  • 89
                  #5
                  Re: Rex Rotary pro 1357ex copy quality issue.

                  Originally posted by slimslob
                  If Toner Supply Mode SP 2208 is set to 1, pixel count, machine will tend to under tone.
                  No, it was set to 0, sensor.

                    Comment

                    • sturmtrooper
                      Copier Combobulator

                      500+ Posts
                      • May 2016
                      • 587
                      #6
                      Re: Rex Rotary pro 1357ex copy quality issue.

                      Originally posted by atech
                      The total copy is almost 1 million, around 960k. I think the machine has not been replaced with new developer ever since. Is it okay if only one toner bank is filled with toner and the other is empty or do I need to fill both?
                      Developer is rated at a 500k life. Given that if it has never been changed the developer could easily be five years old I don't think you'd be out much changing it.

                      As for the toner bottle the user manual says to always put new bottles in the lower position first. "Be sure to set the new toner bottle in the lower hole first "

                        Comment

                        • atech
                          Technician

                          50+ Posts
                          • Aug 2010
                          • 89
                          #7
                          Re: Rex Rotary pro 1357ex copy quality issue.

                          Originally posted by sturmtrooper
                          Developer is rated at a 500k life. Given that if it has never been changed the developer could easily be five years old I don't think you'd be out much changing it.

                          As for the toner bottle the user manual says to always put new bottles in the lower position first. "Be sure to set the new toner bottle in the lower hole first "
                          In case of developer replacement, I'd like to know the procedure specially during developer calibration, could you provide me simulations.. Thanks

                            Comment

                            • Batman1976
                              Technician

                              50+ Posts
                              • Jun 2016
                              • 88
                              #8
                              Re: Rex Rotary pro 1357ex copy quality issue.

                              RTFM!!!!!

                                Comment

                                Previous template Next
                                Working...