Ricoh MP C 4503 exir assem. help

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jper34
    Trusted Tech

    Site Contributor
    100+ Posts
    • Sep 2011
    • 225
    #1

    Ricoh MP C 4503 exir assem. help

    Hi Folks,
    looking for part number for exit assembly, unit behind fuser assem., I'm getting roller rattle ,wich I believe is from that unit. I removed and put a couple drops of flow-tri on the bearings...anyone else have this issue before..? Not too familiar with this model, so looking for experience help..otherwise, can anotone help me with part number the exit assem.?..


    Thanks,
    Jaime
    I.C.S.
    CT.
    Tags: assem, exit, number, part, unit
    • Cipher
      It's not easy being green

      1,000+ Posts
      • May 2006
      • 1309
      #2
      Re: Ricoh MP C 4503 exir assem. help

      D1484401 - Paper exit unit ass'y

      Clean the white idle rollers, they can cause fairly high pitch squealing.
      • Knowledge not shared, is eventually knowledge that becomes lost... like tears in the rain.

      Fully qualified technician for Ricoh - Canon - Sharp - HP - Brother

        Comment

        • tufbnme
          Trusted Tech

          250+ Posts
          • Feb 2008
          • 493
          #3
          Re: Ricoh MP C 4503 exir assem. help

          Here are a couple of bulletins, may help.
          duplex noise1.pdfpaper path noise1.pdfreg area noise.pdf
          Last edited by tufbnme; 10-17-2017, 05:33 PM.

            Comment

            • tufbnme
              Trusted Tech

              250+ Posts
              • Feb 2008
              • 493
              #4
              Re: Ricoh MP C 4503 exir assem. help

              If you are looking for the paper exit assembly, here is the part #
              D1484401
              PAPER EXIT UNIT:ASS'Y

                Comment

                Previous template Next
                Working...