Af 2075 -freeze afther one job

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Butrus
    Trusted Tech

    100+ Posts
    • Jan 2012
    • 115
    #1

    Af 2075 -freeze afther one job

    Machine does one job...no matter if its 1 copy or 1000...print or copy the same
    Does it and then it goes to Please wait....
    No SC code
    Any thoughts?

    Thanx
    Tags: code, copy, job, wait
    • TonerMunkeh
      Professional Moron

      2,500+ Posts
      • Apr 2008
      • 3865
      #2
      Re: Af 2075 -freeze afther one job

      Sounds HDD or memory related to me.
      It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

      Hit it.

        Comment

        • Butrus
          Trusted Tech

          100+ Posts
          • Jan 2012
          • 115
          #3
          Re: Af 2075 -freeze afther one job

          Tried HDD format...

            Comment

            • Butrus
              Trusted Tech

              100+ Posts
              • Jan 2012
              • 115
              #4
              Re: Af 2075 -freeze afther one job

              Tried HDD format... and changed HDD ...the problem remains...

                Comment

                • hossam
                  Technician
                  • Aug 2010
                  • 70
                  #5
                  Re: Af 2075 -freeze afther one job

                  clean or replace DRUM POTENTIAL SENSOR in Drum unit.

                  Note: don't use blower to clean it
                  Attached Files

                    Comment

                    • slimslob
                      Retired

                      Site Contributor
                      25,000+ Posts
                      • May 2013
                      • 37494
                      #6
                      Re: Af 2075 -freeze afther one job

                      The machine is hanging during process control. From the service manual: Any SC codes that are generated during auto process control are logged in the memory and do not appear. Check SP 7403 SC History to see logged errors.

                      Hang could be caused by a dirty potential sensor as hossam said or it could that the machine is badly in need of a major PM service. Also bring all firmware up to date and avoid aftermarket supplies and drums.

                        Comment

                        Previous template Next
                        Working...