CHOKE COILs IN 220V PSU of different B&W AND COLOUR MFPs & PRINTERS

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • muaazgujjar
    Technician

    50+ Posts
    • Feb 2009
    • 67
    #1

    [CQ] CHOKE COILs IN 220V PSU of different B&W AND COLOUR MFPs & PRINTERS

    Hi,
    Is it possible to swap CHOKE COILS of PSU (220V) MFPs of different series and models of B&W and Colored?

    I am talking about CNL almost in all P2P diagrams in PSU area.
    Attached Files
    Tags: b&w, choke, coils, mfps, psu
    • fshead
      Service Manager

      1,000+ Posts
      • Jan 2009
      • 2356
      #2
      Re: CHOKE COILs IN 220V PSU of different B&W AND COLOUR MFPs & PRINTERS

      when i 1st play mcgiver i will do it on one of my parts machine..
      but only if its really needed..not sure that a coil is a high mortality failure..
      but maybe i ve been lucky

        Comment

        • slimslob
          Retired

          Site Contributor
          25,000+ Posts
          • May 2013
          • 37059
          #3
          Re: CHOKE COILs IN 220V PSU of different B&W AND COLOUR MFPs & PRINTERS

          The coils should have a manufacturer code stamped on them.

            Comment

            • muaazgujjar
              Technician

              50+ Posts
              • Feb 2009
              • 67
              #4
              Re: CHOKE COILs IN 220V PSU of different B&W AND COLOUR MFPs & PRINTERS

              Actually I was planning to upgrade some MFPs with 115V power supply units to 220V and I have arranged some power supply units and heater units of 220V .But the choke coils in those PSU are missing .
              I have some choke coils available in scrap and I intends to use them.

                Comment

                Previous template Next
                Working...