mp4000 mp4001 mp4002 cleaning web not rolled-up

[Batman1976]

Re: mp4000 mp4001 mp4002 cleaning web not rolled-up

the purpose of the cleaning web is to clean the fuser roller. WHY in the world would you NOT put in a part that a DESIGN ENGINEER got paid to design and incorporate into the machine?
Running without a cleaning web will cause PQ/CQ issues

Believe me having looked after 60 of these devices in one building and running into a lot of cleaning webb issues we found they will run perfectly fine without them installed if they aren't doing heavy coverage. Saved a lot of time and money to just remove the webb unit.

[Mark Bbb]

Re: mp4000 mp4001 mp4002 cleaning web not rolled-up

I have experienced that the modif cleaning web gives a better performance then the old one: 150K.
It rolls up fine, so no more jams...
I have also find a way to replace the web film: when you reinstall the pressure plate bar, first loosen the screws of the pressure plate, then place it on the unit and then tighten the screws back on...
Good luck!
I replace F.U. when it is broke. Minima 750K!
Development unit: referbish by removing the agitation bar completely and clean the grid of it well, 140K
Also PCU: clean it well and replace parts, 140K
Good luck, boys!