If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
SC-500 caused by leaky developer seals and failed drive gears
Re: SC-500 caused by leaky developer seals and failed drive gears
Originally posted by Robinh
xcopier, I'm looking around from some foam I could use. I just happened to have the RTV, a buddy of mine who used to rebuild toner carts uses this.
Polarbear, I'll have to look for those bushings. I agree, new bushings would be very nice....
Robinh I bought them from a local supplier who sourced them from India (probably via Alibaba.com). They did have minimum quantities though- was around 100 units.
Comment