looking for input regarding mpc2503 series

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • fshead
    Service Manager

    1,000+ Posts
    • Jan 2009
    • 2356
    #1

    looking for input regarding mpc2503 series

    hi.
    I am looking at picking up a few mpc2503 to resell as my source for low meter mpc3002 and mpc3003
    has come up empty..
    are these close to the mpc3003/mpc3503 series outside of speed?
    Any major issues or are they good in a 5k to 10k month setting?
    thanks
    Tags: close, mpc2503, mpc3003/mpc3503, series, speed
    • Zeldaman
      Senior Tech

      500+ Posts
      • Mar 2011
      • 946
      #2

        Comment

        • fshead
          Service Manager

          1,000+ Posts
          • Jan 2009
          • 2356
          #3
          Re: looking for input regarding mpc2503 series

          thanks..'how are the fuser units?
          As i remember the mpc2050 drums had no lub bar and they lasted over the rated life..
          If I had my way i would like to stay with low meter c3002 and c3003 but sometimes
          i just need a machine to place..

            Comment

            • copier tech
              Field Supervisor

              5,000+ Posts
              • Jan 2014
              • 7931
              #4
              Re: looking for input regarding mpc2503 series

              I agree, the 2003/2503 drum & devs rarey hit pm life (60/120k)

              All other parts are fine, fuser, ITB etc.

              I’d wait for a few 3003’s to become available.

              However 5/10k per month should be fine.
              Let us eat, drink, and be merry, because tomorrow we may die!

              For all your firmware & service manual needs please visit us at:

              www.copierfirmware.co.uk - www.printerfirmware.co.uk
              ​

                Comment

                • davel
                  Technician

                  1,000+ Posts
                  • Oct 2011
                  • 1045
                  #5
                  Re: looking for input regarding mpc2503 series

                  If you dont change PCU at PM life they spit toner out everywhere. Quality is not as good as 3003.

                    Comment

                    • fshead
                      Service Manager

                      1,000+ Posts
                      • Jan 2009
                      • 2356
                      #6
                      Re: looking for input regarding mpc2503 series

                      just out of curiosity,has anyone tried to pull apart drum units and "mod" the main charge roller like on the mpc2800/c3300
                      series drums???

                        Comment

                        Previous template Next
                        Working...