mp c4503 with e 22c fiery

[skinnyb]

Re: mp c4503 with e 22c fiery

Update. Found this in an old TSB.

"Refer to the above compatibility table, if you plan to pre-install and pre-configure the E-22C before customersite installation, or if the copier model in use with the E-22C is to be changed.For example, if the copier in use by the customer is C5503, E-22C needs to be pre-installed and preconfiguredwith C5503 or C6003 or C4503."

Maybe the fiery was initially installed on a ProC5100 and it was configured as a E22b.

Also checked all the part numbers for both e22b and e22c and they are identical.

Never thought about that. If that's the case you should be able to reload the fiery system software while connected to the 4503 machine and it work OK. I have reloaded them before, prepare to be there at least 3-4 hours...

Sent from my VS987 using Tapatalk