SR 4060 issue

[digicor]

can any one tell how to fix this? ive tried re setting the fin, no change
thanks for any help
its very hard to find a stray 4060 fin as many of you well know

[Coptech]

Re: SR 4060 issue

Change the foam positioning rollers that are making the clacking noise when they hit the tray because they are too worn.

[digicor]

Re: SR 4060 issue

i have done that on other fins when this happens and it doesnt fix it,
ill be back monday with new gathering rollers, and hope thats all this is

[Coptech]

Re: SR 4060 issue

They look pretty worn down in the video. As mentioned, usually the clunk clunk noise is a tell-tale sign. Good Luck! B8303503

[slimslob]

Re: SR 4060 issue

Looks to me like the foam is worn down level with their plastic cores.

[Codex]

Re: SR 4060 issue

Change the foam rollers

Inviato dal mio SM-G935F utilizzando Tapatalk

[digicor]

Re: SR 4060 issue

in changing the foam rollers today
but if the problem purists, like in the past when ive encounter this, has anyone had the issue resolved?
again, i have changed the foam rollers on other fins and the problem stayed the same, im asking if there is another problem that needs to be addressed if this happens

[?09317]

Re: SR 4060 issue

in changing the foam rollers today
but if the problem purists, like in the past when ive encounter this, has anyone had the issue resolved?
again, i have changed the foam rollers on other fins and the problem stayed the same, im asking if there is another problem that needs to be addressed if this happens

The sponge wheel connecting rod is not positioned

[digicor]

Re: SR 4060 issue

ok it was the foam rollers , but thank you for extra help,
i have had several of these clank even after changing the foam wheels