mpc 3004/3504 SPDF3080 slowing the scan to email/folder speed to stop jams

[sturmtrooper]

Re: mpc 3004/3504 SPDF3080 slowing the scan to email/folder speed to stop jams

I have not been able to find free run for SPDF only RADF and I also have jam/double feed issues with a SPDF on MPC 6004, but they scan a lot of carbonless paper sheets, everything replaced still jams even on normal paper.

I feel your pain brother

It is in SPECIAL SP mode. For machines with regular panels hold # when you hit the system Sp button on the screen. For smart op panels You have to hold one of the EX buttons under the cover on the left side of the panel I think it is the third button.

This also applies to the 54/55 series BW machines.

[FrohnB]

Re: mpc 3004/3504 SPDF3080 slowing the scan to email/folder speed to stop jams

We've had some success in slowing the scan speed. You can slow it down by increasing the dpi (up to 300/400/600) in the scan settings. Some customers will gripe about it being too slow afterwards, but most are fine with it. We've bumped most of them up to 300 dpi before they go out the door, seems to help.

Tried the Blue rubber roller, and quickly went back to what's supposed to be on there.

[Ben Around]

Re: mpc 3004/3504 SPDF3080 slowing the scan to email/folder speed to stop jams

Multi-sheet feeding-check the reverse roller torgue limiter if it uses one.