Mp9003 sr4130 jam 177

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • A1 Tech
    Technical Specialist
    • Mar 2019
    • 1
    #1

    [Jamming] Mp9003 sr4130 jam 177

    Evening all,

    i have a Ricoh mp9003 with an sr4130 booklet finisher that whenever the customer tries to do a staple job ie left hand side double or left hand side corner. The machine instantly throws jam 177 and paper is at registration and b2 guide open but message on screen shows jam 177 in R2-R5 in finisher ???. It will booklet staple and fold and also output to the top tray of the finisher without staple. Just wondered if anybody had come across this in the past? TIA
    Tags: booklet, finisher, jam, side, staple
    • slimslob
      Retired

      Site Contributor
      25,000+ Posts
      • May 2013
      • 37052
      #2
      Re: Mp9003 sr4130 jam 177

      Have you ever thought of checking the service manual? Under Finisher SR4130 Paper Jam Errors J177, Booklet Stapler Movement Motor Jam.

        Comment

        • mga
          Copier Technician

          Site Contributor
          1,000+ Posts
          • Dec 2010
          • 1393
          #3
          Re: Mp9003 sr4130 jam 177

          Originally posted by stevenck10
          Wow...wish I had have thought of that one.
          ��
          Wow answers like that you may not get much help here
          Regards Mark

          FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

          RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

          https://copierservices.simdif.com

            Comment

            • stevenck10
              Junior Member
              • Jun 2016
              • 2
              #4
              Re: Mp9003 sr4130 jam 177

              Ok, I didnt expect that reply to be honest, I suppose your rite. It probably is the wrong place with silly reply like that.
              It's as bad as saying have you switched it off and on.
              Kind of an obvious thing wouldnt you think?

                Comment

                • mga
                  Copier Technician

                  Site Contributor
                  1,000+ Posts
                  • Dec 2010
                  • 1393
                  #5
                  Re: Mp9003 sr4130 jam 177

                  Originally posted by stevenck10
                  Ok, I didnt expect that reply to be honest, I suppose your rite. It probably is the wrong place with silly reply like that.
                  It's as bad as saying have you switched it off and on.
                  Kind of an obvious thing wouldnt you think?
                  No problems if you take some time and browse the threads you would start to know some users that do reply to messages do know what the are talking about.

                  Jam177 stapler assy moving problems I would check you can move stapler assy freely. There's also been some problems with stapler harness damage wire check harness may look OK but see if been rubbing on frame. Also with all ricohs make sure all firmwares are up to date.

                  Ps slimslob is one of the good ones
                  Regards Mark

                  FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

                  RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

                  https://copierservices.simdif.com

                    Comment

                    • slimslob
                      Retired

                      Site Contributor
                      25,000+ Posts
                      • May 2013
                      • 37052
                      #6
                      Re: Mp9003 sr4130 jam 177

                      Originally posted by mga
                      Wow answers like that you may not get much help here
                      And he would be surprised at how many of those posting questions here don't even have a manual let alone read it. My policy when I was working was give me a manual and a parts source and I will fix it. The biggest problem before I found this site was the parts source.

                        Comment

                        • stevenck10
                          Junior Member
                          • Jun 2016
                          • 2
                          #7
                          Re: Mp9003 sr4130 jam 177

                          Fair enough. I understand were your coming from now. Thanks for the help.

                            Comment

                            Previous template Next
                            Working...