Hi all,
I have a customer with two identical MP C6004 models both with booklet finishers etc one has been set up with various programmed short cuts about 20+ my customer wants the same on the other machine.
So my question is rather than set up each one again from scratch can I backup/restore these settings? I tried backup/restore address book & user settings but this did not save these program settings!
*Update I used the import/export device setting option via the WIM that worked great*
Cant seem to delete this post.
Program.jpg
I have a customer with two identical MP C6004 models both with booklet finishers etc one has been set up with various programmed short cuts about 20+ my customer wants the same on the other machine.
So my question is rather than set up each one again from scratch can I backup/restore these settings? I tried backup/restore address book & user settings but this did not save these program settings!
*Update I used the import/export device setting option via the WIM that worked great*
Cant seem to delete this post.
Program.jpg