Ricoh pro5100 sc 569-02

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • levantin
    Technician
    • Aug 2019
    • 26

    Ricoh pro5100 sc 569-02

    ricoh pro c5100 error message sc569-02 have any way to fix it. thank you
  • copier tech
    Field Supervisor

    5,000+ Posts
    • Jan 2014
    • 7931

    #2
    Re: Ricoh pro5100 sc 569-02

    Originally posted by levantin
    ricoh pro c5100 error message sc569-02 have any way to fix it. thank you
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk

    Comment

    • levantin
      Technician
      • Aug 2019
      • 26

      #3
      Re: Ricoh pro5100 sc 569-02

      Thanks
      I went through it but I wanted to know more

      Comment

      • slimslob
        Retired

        Site Contributor
        25,000+ Posts
        • May 2013
        • 35063

        #4
        Re: Ricoh pro5100 sc 569-02

        Originally posted by levantin
        I wanted to know more
        Become an authorized dealer and then attend classroom training.

        As for your current error, you might have a scrap of paper covering a contact on the drawer connector(s). I had one where the scrap was just large enough to cover one contact.

        Comment

        • levantin
          Technician
          • Aug 2019
          • 26

          #5
          Re: Ricoh pro5100 sc 569-02

          Originally posted by slimslob
          Become an authorized dealer and then attend classroom training.

          As for your current error, you might have a scrap of paper covering a contact on the drawer connector(s). I had one where the scrap was just large enough to cover one contact.
          I suspect a drying heater lift error

          Comment

          • Zaxxon
            Senior Tech

            500+ Posts
            • Jan 2014
            • 608

            #6
            Re: Ricoh pro5100 sc 569-02

            You should listen to slimslob
            Please start you post with brand, model, problem.

            Comment

            Working...