Flashing close cover light and finisher momentarily cycles in a continuous loop. Disconnect finisher and it all calms down. Removed covers and inspected all sensors and switches. everything looks good. Any Ideas?
-
-
Check the door switch and the actuator.Make sure the switch is being pushed in all the way or that the switch doesnt have a burn spot on the contact. -
Check the timing gear for the paddles. There's a little notch on it that can break off so the gear never finds home position.Comment
-
what does the SMC report?
Is the any random SC-codes logged? If so what are they?Comment
-
There are no random SC codes. I disassembled and reinspected and it worked when I put it back together. I don't have a warm and fuzzy feeling but it has gone three days now w/o reoccurance.Comment
Comment