SR 850 finisher

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • CableGuy
    Impulse Drive Engineer

    250+ Posts
    • Oct 2008
    • 417
    #1

    SR 850 finisher

    Hi all.
    Just wondered if anyone had the part no. handy for a staple unit on a SR850 inisher. I've had a look on Tessa site for a part manual, but can't locate the require manual. Before I tear the last of my hair out, could someone please advise.....
    Many thanks to all
    Tags: 850, disassemble, finisher, tear
    • iMind
      Vacuum Cleaning Expert

      1,000+ Posts
      • Mar 2008
      • 1116
      #2
      AJ 01-1018 Stapler, I can upload file when I get home
      sigpicWe can all Win, but at the end we all loose. Save the greyhound

        Comment

        • mikadonovan
          Senior Tech

          Site Contributor
          2,500+ Posts
          • May 2008
          • 2931
          #3
          The stapler assembly part # is B4686200
          NEVER ASSUME ANYTHING

            Comment

            • CableGuy
              Impulse Drive Engineer

              250+ Posts
              • Oct 2008
              • 417
              #4

                Comment

                • TonerMunkeh
                  Professional Moron

                  2,500+ Posts
                  • Apr 2008
                  • 3865
                  #5
                  I wouldn't, in my experience once these staple units have started exhibiting faults they've pretty much had it.
                  It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

                  Hit it.

                    Comment

                    • schooltech
                      School District Tech

                      500+ Posts
                      • Jun 2008
                      • 504
                      #6
                      Unfortunately there is not a way to really order parts for the stapler, just in case you do find a problem.

                      But, as TonerMunkeh said, I would also just replace it. You'll end up disassembling it, probably not find any one thing causing the problem, then wonder where in the hell the last hour of your time went.

                      Most techs end up trying to have a stapler assembly ready to go for when they get flaky.
                      Bachelor of Science in Information Technology, Comptia A+, Comptia Network+

                        Comment

                        Previous template Next
                        Working...