MP C3503, intermittent edge folds.

[FrohnB]

Re: MP C3503, intermittent edge folds.

update:
this week, it happened to me on an mpc2503, same problem, on the additional lower drawer, PB3160, practically the door (D6932601) did not close perfectly, I realized it because I held it with my hand pressed, the problem did not, I added, a plastic washer as a thickness between the external white cover (D6932651) and the internal black one (D6932652), solved.
probabilmete is a deformation of the metal frame due to the transport, the machines without box are easily damaged by transporting them with a trolley inserted underneath, in the company we will see to move those without box by inserting a wooden table as a base, obviously the problem does not exist if the machine has a wooden cabinet

regards

If I see someone even attempt to put a two-wheel cart under a machine for moving, I quickly run over, and just as quickly smack the shit out of them! Have had too many machines with drawer 4 stuck. Easy solution is to yank the drawer out and just step down on the metal frame to straighten it (flimsy stuff).