Can i convert a SOP machine back to NOP?

[fshead]

HI
I have a low meter MPC401SR that i want to pop a SOP panel on and remove that SOP from a high meter MPC401SR.
Can i then convert that high meter SOP machine into a NOP once I swap op panels and change the FW,do all the SP modes that are listed in manual?
thanks

[slimslob]

Re: Can i convert a SOP machine back to NOP?

I believe so. You merely need to reverse the installation steps. Do the last step first and work backward to the first of the installation.

[fshead]

Re: Can i convert a SOP machine back to NOP?

thanks
I have only used package FW on both NOP and SOP mpc401 that i placed.
Regarding the engine and system FW for the mpc401 BOTH NOP and SOP versions ,can you tell me are they both the same prefix D190.....

[Klydon]

Re: Can i convert a SOP machine back to NOP?

I did not see a engine listing for the SOP version. System has a D191 prefix for both versions. (latest is 1.14 for SOP and 1.13 for the regular panel).

[slimslob]

Re: Can i convert a SOP machine back to NOP?

I did not see a engine listing for the SOP version. System has a D191 prefix for both versions. (latest is 1.14 for SOP and 1.13 for the regular panel).

Normally the engine firmware is the same for both.

[mga]

Re: Can i convert a SOP machine back to NOP?

Smart panels have different firmware

[mga]

Re: Can i convert a SOP machine back to NOP?

Please see attachments if helps

[fshead]

Re: Can i convert a SOP machine back to NOP?

I found the mpc401 Z SOP romdata FW now I just need to get mpc401 NOP romdata FW..

[slimslob]

Re: Can i convert a SOP machine back to NOP?

Smart panels have different firmware

Only certain modules. Other modules are common to both panels.