Chinese diagnostic screen
I'm working on a Gestetner DSM645 that displays Chinese characters in Diagnostics.The customer screen is in english.Lucky for me I can do basic tasks just by knowing where the tabs are but if I need to access something different I'm screwed.How do I set diagnostics back to ENGLISH?
-
-
5807* | Area Selection
5807 1| Selects the Display Language Group.
1 = Japan, 2 = North America, 3 = Europe, 4 = Taiwan, 5 = Asia, 6 = China, 7 = KoreasigpicWe can all Win, but at the end we all loose. Save the greyhound -
I know how that is. I got a replacement Samsung main board that arrived set to Portuguese.
I know a little Spanish, so it managed to fumble through the language change-over. But the way, "language" in Portuguese is "idioma". =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
Comment