Re: RICOH PRO C5100
wow
hahahaha
hacker
I am a professional technician who has gained all 16 years of experience based on my self-confidence and reading manual service books.
When I visited this site, I thought that maybe there are honorable colleagues here with whom I can establish friendly relations
But I was wrong about this site
RICOH PRO C5100
Collapse
X
-
Re: RICOH PRO C5100
Someone that gives inaccurate fixes?
No we don't like fakes... liars.. jackasses.
Shove WhatsApp up your ass.. lots of hackers use that app.
But what else can we expect from lowlifes?
Sent from my SM-G960U using TapatalkLeave a comment:
-
Re: RICOH PRO C5100
I didn't expect that in this place, if you see a technician with high self-confidence, you will empty the mold so much and make fun of it out of necessity.Leave a comment:
-
Re: RICOH PRO C5100
Anyway, I will solve the problem of this device
But the humor I saw here is not worth itLeave a comment:
-
Re: RICOH PRO C5100
And from all we see from you it would appear that you are a hacker.Leave a comment:
-
Re: RICOH PRO C5100
I thought that there were a number of honorable and enlightened colleagues here who could be easily contacted and befriended.
But unfortunately, all my ideas were reversed
I see nothing but jealousyLeave a comment:
-
Re: RICOH PRO C5100
he has a fix for everyone else (sarcasm) but runs 5801? bwahahahahaLeave a comment:
-
Re: RICOH PRO C5100
You had better have the birth certificate for the machine. Otherwise in running SP 5801-001 you have cratered the machine by erasing all initial factory settings. You now have a very expensive boat anchor.Leave a comment:
-
RICOH PRO C5100
Hi everyone
I am a technician
A Ricoh pro C5100 photocopier had a problem that just to save directly from the computer to the server document, it didn't just store the custom size.
To solve this problem, I think that the operator may have done something in the device's mode service. That's why I entered the code 5801 in the device, but after restarting the device, it doesn't recognize the toner cartridges at all. I entered the code 5061.
But the message was that the cartridges were empty
I installed the new toner chip, but it still didn't work
I served the whole topper hopper, but it still didn't work
In addition, the problem of storing custom sizes was not solved
Has anyone ever had this problem?
Or does anyone have a solution to these problems?WhatsApp Image 2020-04-24 at 16.41.27.jpgWhatsApp Image 2020-04-24 at 16.41.27(1).jpgLast edited by farhad; 04-26-2020, 01:06 PM.
Leave a comment: