MPC6502 fuser to an MPC8002

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • slimslob
    Retired

    Site Contributor
    25,000+ Posts
    • May 2013
    • 37360

    #16
    Re: MPC6502 fuser to an MPC8002

    Originally posted by anothertech
    Might be better to take all of the good parts from the new fuser to rebuild the used fuser.
    Just remember that if the bad one has a bad IH coil or pressure roller heater, you will have order a new one.

    Comment

    Working...