If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
a single PCU?
and that cleaning unit can last a long time..
I ve got a ton of mpc2800/c3300/c3501 gutted parts and at the point
of thinking do i want to gut another trade in when i update accounts..
The drum are the same as mpc3502.
a single PCU?
and that cleaning unit can last a long time..
I ve got a ton of mpc2800/c3300/c3501 gutted parts and at the point
of thinking do i want to gut another trade in when i update accounts..
The drum are the same as mpc3502.
We bought this machine via a auction company.
I think there was some cheating on this machine, because i never have seen such a dirty and worn out cl unit!
Also - and Probabely - they have tried to clean the pcu, because there was a "zone" - every 5" - on the printouts where the image was smeared.
We never test those machines before bying it, because the test-day is at a different time, and since this company is miles away from where we life, we see it as a "gamble". Mostely we are lucky .
here in ny the auctions are mostly shady..
I only buy lease returns and once in a blue moon will get a bad machine.
I had one that must have had chemical around it as the metals were pitted and grainy.
I just gut it and save what is good..
It is time vs real cost..
And i can always get another..
where are you located?
Comment