Can't get the toner to adhere to the #10 envelope when printing. All other prints and copies look great. What gives?
-
-
It sounds like it's not fusing correctly, which is usually paper too thick and the machine does not know that the paper is thicker than normal.
Tell the machine that you're running the envelopes, and tell the machine to run it in thick paper mode. Once the envelope is in the bypass tray, press the # button, which should bring up the special paper menu.Bachelor of Science in Information Technology, Comptia A+, Comptia Network+ -
You might try another brand on envelopes if changing the settings doesn't help. I had a customer with some that just wouldn't fuse.the savin2535 is displaying well bet the hiter lamp is not shining and the lamp had been tested o.k.please kindly help.Samir: No, not again. I... why does it say paper jam when there is no paper jam? I swear to God, one of these days, I just kick this piece of shit out the window.
Michael Bolton: You and me both, man. That thing is lucky I'm not armed.Comment
-
If they are linen it will likely be a problem."Some days you get the bear, some days the bear gets you."
Cdr. William RikerComment
-
The 2035/2045 series don't support envelopes.Comment
Comment