Ricoh mpc 2800 sc672

[slimslob]

Re: Ricoh mpc 2800 sc672

thanks for info, really interesting to know,a tech here suggested the touch screen is faulty, could it be ??? as no buttons are functioning,is it the initialization process that when it comes to the display section it stops ???Thanks all for your support

Touch screen problems result in either no response or the wrong response. There is a touch screen test and adjustment section in the service manual.

[johncord]

Re: Ricoh mpc 2800 sc672

frankly speeking ,i think i have to get hold of some boards, strange where to start..tks for response, as i cannot even enter service mode since error is at startup

[johncord]

Re: Ricoh mpc 2800 sc672

any suggestions or test points to verify which board bicu or controller board, looked around in my country to buy used but negative feedback, just installed a dx3725 but the mpc 2800 is really good for its age , have lots of toners and parts that is why i like to get it going... any suggestions ?? thanks

[slimslob]

Re: Ricoh mpc 2800 sc672

any suggestions or test points to verify which board bicu or controller board, looked around in my country to buy used but negative feedback, just installed a dx3725 but the mpc 2800 is really good for its age , have lots of toners and parts that is why i like to get it going... any suggestions ?? thanks

You might search to see if you can buy a complete C2800 for a parts machine. Here in California we can often find them for less than a new major board costs from Ricoh.

[fshead]

Re: Ricoh mpc 2800 sc672

any suggestions or test points to verify which board bicu or controller board, looked around in my country to buy used but negative feedback, just installed a dx3725 but the mpc 2800 is really good for its age , have lots of toners and parts that is why i like to get it going... any suggestions ?? thanks

dude maybe tell us which country you reside.

[johncord]

Re: Ricoh mpc 2800 sc672

In the middle of the Mediterranean ..... MALTA