MPC3004 please wait

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • mga
    Copier Technician

    Site Contributor
    1,000+ Posts
    • Dec 2010
    • 1393
    #16
    Re: MPC3004 please wait

    Originally posted by Keegan Chetty
    Hi All

    Please could I have some assistance, I have an MPC3004 which comes up with please wait, there are no errors, no SC codes, the please wait doesn't go away and there is no "check status" option on the bottom left corner to go to SP mode.

    I've tried replacing the HDD and formatting but it still does the same thing. Is there any way to reset this machine without replacing the controller? I think the machine had software like papercut previously.

    Thank you
    Here's a technical bulletin
    Attached Files
    Regards Mark

    FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

    RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

    https://copierservices.simdif.com

      Comment

      • skinnyb
        Trusted Tech

        250+ Posts
        • Jul 2008
        • 291
        #17
        Re: MPC3004 please wait

        Had a MP C3004 do this a while back. New op panel fixed it.

        Sent from my LM-V405 using Tapatalk

          Comment

          Previous 1 2 template Next
          Working...