SC502 ON MP7503

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • kannuki2
    Trusted Tech
    250+ Posts
    • Feb 2012
    • 398
    #1

    SC502 ON MP7503

    Hello All,

    I have a Ricoh MP7503Sp that having an SC502.
    I've replaced a new tray2 lift motor (AX040199) and paper feed unit D2236310 and still having same issue.
    Any suggestions is really appreciative.
    Tags: ax040199, d2236310, paper, sc502, unit
    • TonerMunkeh
      Professional Moron

      2,500+ Posts
      • Apr 2008
      • 3873
      #2
      Re: SC502 ON MP7503

      Is there a sub code?
      It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

      Hit it.

        Comment

        • mikadonovan
          Senior Tech

          Site Contributor
          2,500+ Posts
          • May 2008
          • 2936
          #3
          Re: SC502 ON MP7503

          Any Sc502's on trays 2 and 3 I have had over the years have always been the lift motor, bound up lift plate in the tray, or the lift plate upper limit sensor not working. I did cause this code one time by using a paper tray from another machine that fit fine, but the sensor flag cutout in the lift plate was in a different position. Had to scratch my head a minute on that one.
          NEVER ASSUME ANYTHING

            Comment

            • mga
              Copier Technician

              Site Contributor
              1,000+ Posts
              • Dec 2010
              • 1393
              #4
              Re: SC502 ON MP7503

              Originally posted by kannuki2
              Hello All,

              I have a Ricoh MP7503Sp that having an SC502.
              I've replaced a new tray2 lift motor (AX040199) and paper feed unit D2236310 and still having same issue.
              Any suggestions is really appreciative.
              If you did replace both with jew you should be ok check sensor actuator {common problem}
              Regards Mark

              FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

              RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

              https://copierservices.simdif.com

                Comment

                • slimslob
                  Retired

                  Site Contributor
                  25,000+ Posts
                  • May 2013
                  • 35067
                  #5
                  Re: SC502 ON MP7503

                  Are you aware that the only parts catalog I can find a listing for the AX040199 rise motor in is the DF3100 SPDF. I have a feeling that it might not have the same lift ability as the proper rise motor for a Martini trays 2 and 3. Maybe if you load only 50 sheet of paper at a time it will work. I don't think that you can put 550 sheets on the feed table of a doc feeder. Might want to try the AX040254 motor best time.

                    Comment

                    • mga
                      Copier Technician

                      Site Contributor
                      1,000+ Posts
                      • Dec 2010
                      • 1393
                      #6
                      Re: SC502 ON MP7503

                      Originally posted by slimslob
                      Are you aware that the only parts catalog I can find a listing for the AX040199 rise motor in is the DF3100 SPDF. I have a feeling that it might not have the same lift ability as the proper rise motor for a Martini trays 2 and 3. Maybe if you load only 50 sheet of paper at a time it will work. I don't think that you can put 550 sheets on the feed table of a doc feeder. Might want to try the AX040254 motor best time.
                      That AX040199 the correct number
                      Attached Files
                      Regards Mark

                      FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

                      RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

                      https://copierservices.simdif.com

                        Comment

                        • Phil B.
                          Field Supervisor

                          10,000+ Posts
                          • Jul 2016
                          • 22808
                          #7
                          Re: SC502 ON MP7503

                          Originally posted by mga
                          That AX040199 the correct number
                          Is that one of those '3D' manuals?
                          I hated them, a lot of times they attached the wrong part #.

                          Sent from my SM-G960U using Tapatalk

                            Comment

                            • mga
                              Copier Technician

                              Site Contributor
                              1,000+ Posts
                              • Dec 2010
                              • 1393
                              #8
                              Re: SC502 ON MP7503

                              Originally posted by Phil B.
                              Is that one of those '3D' manuals?
                              I hated them, a lot of times they attached the wrong part #.

                              Sent from my SM-G960U using Tapatalk
                              Hi phil b my friend no I don't use them that's the standard pdf one that's how they are now I can't get to grips with the 3d explorer stay safe stay well
                              Regards Mark

                              FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

                              RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

                              https://copierservices.simdif.com

                                Comment

                                • luca72
                                  Field Supervisor

                                  1,000+ Posts
                                  • Oct 2017
                                  • 1556
                                  #9
                                  Re: SC502 ON MP7503

                                  Originally posted by kannuki2
                                  Hello All,

                                  I have a Ricoh MP7503Sp that having an SC502.
                                  I've replaced a new tray2 lift motor (AX040199) and paper feed unit D2236310 and still having same issue.
                                  Any suggestions is really appreciative.
                                  the connectors of the paper feed station that you removed, are well inserted or damaged pin?
                                  "loneliness is an invention of the white man, when we are alone we talk to everything around us, we are never alone" (Ojibwa)

                                    Comment

                                    Previous template Next
                                    Working...